XtendLan XL-GDB101V, Руководство пользователя

Страница: 16 / 95

XtendLan XL-GDB series User’s Guide
Chapter 4: Installation
4.1 General
The following section will help you to understand how to install the XL-GDB access system.
Understanding these topics will definitely make you knowing the XL-GDB better.
4.1.1 Unpacking your XL-GDB
Depending upon the number of units and spares you ordered, your shipment consists of one or
more boxes containing the following materials:
•
One XL-GDB unit.
•
One AC power adapter with cord or power cord.
•
This document.
•
Any other accessories requested by user at time of ordering.
Check the contents of the package and inspect the unit for any signs of damage. Reports any
damage to the carrier or contact XtendLan Corporation’s customer service representative.
4.1.2 Site Selection
The following are guidelines for site selection. These guidelines must be followed to ensure a
proper installation site. The installation site should have a 100V to 240V AC power receptacle for
the AC adapter. The installation site should provide space for adequate ventilation and cable
routing reserve at least 5 inches at the rear of the unit for cables and airflow. Moreover, the units
are designed for indoor use only.
4.1.4 Installation
Installing a XL-GDB requires several I/O cables, which you will have to supply. The I/O cables
should be long enough to connect your local and remote equipment to the system’s local and
remote jacks. All of the cables are identified below: Link cable. Connects your data equipment to
the XL-GDB unit. The connector on the XL-GDB end of the cable must be depends upon the type
of mating connector on your equipment. The pin assignments for these connectors appear in
Appendix A. Line cables. Line cables connect the DSL line to the XL-GDB. The SHDSL loop
connection uses pins 4 and 5 of the 8 pins RJ-45 jack. One can use the optional RJ45 to RJ11
16