XtendLan XL-GDB101E, Руководство пользователя

Страница: 18 / 95

XtendLan XL-GDB series User’s Guide
4.2 Installation Procedure
1. Place the XL-GDB within 5 meters (15 feet) of your equipment. The actual distance
depends on how long the link cable is.
2. Connect the power adapter (supplied with the unit) to the AC power receptacle on the rear
of the unit. Connect the other end of the power adapter to the appropriate AC power source,
and this action will turn the unit on.
3. Connect and install the DSL line cable to the SHDSL modem unit’s LOOP jack. The 8 pins
LOOP RJ-48 jack uses pins 4 and 5 for loop connection. As an optional accessory,
XTENDLAN can include a DSL line cable, which has RJ-48 connector on one side and
RJ-11 connector on the other side. Appendix A lists the pin assignments for this cable.
4. The XL-GDB modem unit goes through an initialization and startup process; during this
time, the LEDs will flash to indicate that system initialization is in process.
5. Attach the end of the link cable to the port in the center of the rear panel. This connector is
M34F for V.35 interface, DB25 for EIA-530/RS-449 interface and RJ-45 for an Ethernet
interface.
6. If you are using the CID port, connect the cable between your PC and CID port on the rear
of the local unit. This port is configured as DCE.
7. For detailed information about the dip switches and push button on the 10/100 BaseT
interface, please check Appendix C.
18