XtendLan XL-EFM404 G.SHDSL .bis EFM Modem User Manual
V0.01
----------------------------------------------------------------------
Command: setup mgmt 1 address <ip> <netmask>
Message: Please input the following information.
IP address (ENTER for default) <192.168.1.1>:
Subnet mask (ENTER for default) <255.255.255.0>:
----------------------------------------------------------------------
DHCP
Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network
administrators to manage centrally and automate the assignment of Internet Protocol (IP)
addresses in an organization's network. Using the Internet Protocol, each machine that can
connect to the Internet needs an unique IP address. When an organization sets up its computer
users with connection to the Internet, an IP address must be assigned to each machine.
Without DHCP, the IP address must be entered manually at each computer. If computers move
to another location in another part of the network, a new IP address must be entered. DHCP
lets a network administrator to supervise and distribute IP addresses from a central
point and automatically sends a new IP address when a computer is plugged into a different
place in the network.
To configure DHCP server, move the cursor to dhcp and press enter.
>> generic
DHCP server generic parameters
fixed
DHCP server fixed host IP list
relay DHCP
relay
parameter
list Show
DHCP
configuration
The generic DHCP parameters can be configured via generic command.
>> active
Tigger DHCP server function
gateway
Default gateway for DHCP client
netmask Subnet
maskj
for
DHCP
client
ip_range Dynamic
assigned
IP
address
range
lease_time
Configure max lease time
name_server1 Domain
name
server1
name_server2 Domain
name
server2
name_server3 Domain
name
server3
Active the DHCP function with active command.
Set the default gateway for DHCP client use gateway command.
The subnet mask for DHCP client is configured by netmask command.
Ip_range command is to configure dynamic assigned IP address range.
55
