XtendLan XL-EFM-404 Скачать руководство пользователя страница 55

Страница: 55 / 64

XtendLan XL-EFM404 G.SHDSL .bis EFM Modem User Manual

V0.01

To active the VLAN function, move the cursor “

>> “

to mode and press enter. The products

support two types of VLAN, 802.1Q and Port-Based.

The 802.1Q defines the operation of VLAN bridges that permit the definition, operation, and

administration of VLAN topologies within a bridged LAN infrastructure.

Port-Based VLANs are VLANs where the packet forwarding decision is based on the

destination MAC address and its associated port.

Mode:

-----------------------------------------------------------------------------

Command: setup vlan mode <Disable|8021Q|Port>
Message: Please input the following information.

Trigger VLAN function (TAB Select) <Disable>:

-----------------------------------------------------------------------------
Modify:

-----------------------------------------------------------------------------

Command: setup vlan modify <1~8> <0~4094> <string>
Message: Please input the following information.

VLAN table entry index <1~8>:

-----------------------------------------------------------------------------
Pvid:

-----------------------------------------------------------------------------

Command: setup vlan pvid <1~6> <1~4094>

Message: Please input the following information.

Port index <1~6>:

VID value (ENTER for default) <1>:

-----------------------------------------------------------------------------
Link_mode:

-----------------------------------------------------------------------------

Command: setup vlan link_mode <1~6> <Access|Trunk>
Message: Please input the following information.

Port index <1~6>: 1

Port link type (TAB Select) <Access>:

-----------------------------------------------------------------------------

MGMT

Move the cursor “

>> “

to mgmt and press enter.

MGMT interface parameters can be configured MGMT IP address and subnet mask.

----------------------------------------------------------------------

Command: setup mgmt <1~1> <more...>

Message: Please input the following information.

Interface number <1~1>:

----------------------------------------------------------------------

The EFM modem only have one MGMT interface can use, so that use the default interface

number is 1.

>> address

MGMT IP address and subnet mask

Содержание XL-EFM-404

































































Результаты поиска

Содержание XL-EFM-404

Отзывы:

Бренды по названию

Популярные бренды

XtendLan XL-EFM-404, Руководство пользователя

Результаты поиска

Содержание XL-EFM-404

Отзывы:

Бренды по названию

Популярные бренды