XL-DM317G Multi-service Access
Test PDA
21
The charging time is about 7~9 hours. (More accurate
time will depend on the battery condition.)
The environment temperature of normally charging
should be 0
℃
~40
℃
. Charging under below 0
℃
or above
40
℃
, the battery performance will descend and the battery
life will shorten. When charging under too high or too low
temperature for a long time, it will cause damage to the
battery. For example, the battery can't charge fully and
cause the battery inflation.
It will lengthen the charging time to use nonstandard
charger.
It will also lengthen the charging time to operate the
tester when charging.
Note:
■ You should fully charge the tester before the first usage;
please disconnect the charger in time after charging finished
because the long-time charging will damage the battery
performance.
■ Please guarantee that the battery is inside of the tester.
■ When it is not charging, please take the charger from the
outlet.
■ When it is charging in very low battery, the tester will not
start immediately and will display low battery prompt if you
do booting operation. After charging for a while, the tester
will start normally.
■ Charger is safety device, please use our specialized
charger. Meanwhile, please be careful during the usage.
Содержание XL-DM317G
