When one connection item is set as direct connection upon the system starting up, click
“direct” button or press Alt + T, a confirmation dialog box of canceling the direct connection
would pop up, click “yes” and the system would cancel the direct connection setting of the
selected item in current list box and the connection item would not connect directly when the
terminal starting up. As the picture shows below:
2.2.1 RDP Connection Guide
Click “Add” in connection manager, select RDP connection type and click “Next” to enter
RDP connection setting dialog box.
1.
General
In this property page, you need to input the name of the new connection in “session name”
and input server IP address or server name in “Server Address”; the connection name should not
be the same with other RDP connections.
If you check “Automatic login”, then it would automatically connect to the server with the
username, password and domain name you input. You can inquiry the system administrator for the
domain name; if there is no domain, you can input the machine name of the server or leave it
blank.
