XtendLan TC-60xL, Руководство пользователя

Страница: 21 / 50

20
Restart your computer.
2.5 Uninstall NetPointMic
Click Start , All Programs, and NetPointMic and then click “Uninstall ”.
After uninstallation, you must restart the computer.
After you uninstall it, please check your Device Manager if the drivers of NetPoint Virtual Audio
are fully removed.Otherwise you need to uninstall again.
3. IP Address Setting
There are two IP address will be setup. One is terminal’s Local IP, the other one is
Server’s IP.
3.1 Setting Terminal’s IP Address
There are two ways to setup the Terminal’s IP address.
G
ET
D
YNAMIC
IP A
DDRESS FROM
DHCP S
ERVER
"Dynamic Host Configuration Protocol” (DHCP) is an IP standard designed to reduce the
complexity of administering IP address configurations. A DHCP server would be set up with the
appropriate settings for a given network. Such settings would include a set of fundamental
parameters such as the gateway, DNS, subnet masks, and a range of IP addresses. Using DHCP
on a network means administrators need not configure these settings individually for each client
on the network. The DHCP would automatically distribute them to the clients itself. As to how a
DHCP server is setup is beyond the scope of this user manual. However, when the network
terminal is connected to a Network having a DHCP server, the settings for the Terminals would
be as follows