alarm: e.g. a siren.
ALARM
CONTACT
ON/OFF
Alarm output polarity: normally open (
ON
)
or normally closed (
OFF
).
The circuit will open to generate an alarm if
it is
“
NC
” and will close if it is “
NO
”.
ALARM
SETTINGS
This submenu contains the alarm settings.
CLEAR
SETTINGS
This submenu is used to delete the alarm
programming.
DWELL
TIME 1
0 ~ 30
Time (in seconds) of activation of the AUX1
output.
DWELL
TIME 2
0 ~ 30
Time (in seconds) of activation of the AUX2
output.
Table 30
If an alarm is triggered during any automatic operation of the camera (Pattern,
Auto Tracking, etc.), the operation in progress is stopped and the camera
executes the action that has been set in the
ALARM ACT
menu:
In the event of Preset action, the camera moves to the preset position.
Then, if the option
PARK ACTION
is set to execute an action, the action will
be executed after the
PARK TIME
period has expired.
In the event of "
PATTERN, CRUISE
" actions, the action is executed by the
camera permanently and can only be stopped by one of the following
actions: any command sent by a controller or any alarm event.
4.5.5. TRACK
TRACK
-----------------------------------
1.
<DEFAULT SETTING>
2.
SIZE SNS:
MEDIUM
3.
GRAY SNS:
MEDIUM
4.
LOST ACT:
TO HOME TRA
5.
ZOOM SETTING:
OFF
6.
WAIT TIME<S>:
15
7.
<TRACKING BOUNDARY>
8.
AUX:
OFF
9.
TRACKING SPEED:
AUTO
10.
TRACKING TIME<M>:
AUTO
11.
BACK
12.
EXIT
46 / 56
