XtendLan IP SENSOR ESZ-162, Руководство пользователя

Страница: 6 / 20

- 6 -
8. Setting the buzzer
User can turn off the buzzer in setup webpage, then buzzer will not alarm . User can turn off the alarm in one
monitoring item, so when this monitoring item reach the alarm level , ESZ-162 will not alarm. When one or
multiple monitoring item trigger the alarm, you can cancel the alarm by pressing the alarm reset button, but
when these
monitoring item reach the alarm level again, the buzzer will make an alarm again.
9. LED display
ESZ-162 can display its working state through the digital LED, for example:
Display from left to right :
IP , 192 , 168 , 100 , 99 , 80 , P1 , 3.00, P2, 0.03 , P3 , 2.00 , T1, 29 , T2 , -48 , T3, -48, F1, 3824 ,
F2 , 3633 , F3 , 0 .
* IP : means following will display the IP address of ESZ-162. IF following displays 192, 168, 10, 100 : 50
(in 5 times), it means the IP address of ESZ-162 is 192.168.10.100 : 50.
* V1 V2 V3 : means following will display the voltage values of 3 route monitoring voltage.
* T1 T2 T3: means following will display the temperature values of 3 route monitoring temperature(in degree
centigrade, C)
* F1 F2 F3: means following will display the rotate speed of 3 route monitoring fan.
2. Specification
ESZ-162E package contents
One set of ESZ-162
One 1A, 110~220V power adapter
2 temperature sensors
3 voltage sensor wires
Minimum System Requirements
■
Intel Pentium III 300MHz or above/compatible AMD CPU
■
WINDOWS operating system (IE5.0+SPI) & LINUX
■
Minimum 64MB RAM
■
VGA Card: supported direct draw
Network card with RJ45 port & Ethernet HUB or Switcher
■
Internet network (Ethernet, ADSL or other ways, depends on whether you need far end control ability or
not)