XtendLan HDC-SDOMEO51MIR-B, Руководство пользователя

Страница: 7 / 23

3
About The Product
Functions
Soft Address
The camera address can be programmed with a preset command, and the user does not need to
dismount the camera from field or do any screw work.
Self-Adaption of Protocol and Baud Rate
The camera can automatically identify the protocol (Pelco D/P) and baud rate of the controller and
adapt the camera setting accordingly, with no manual DIP Switch involved.
Day/Night Function
The IR cut filter of camera module inside the camera can be removed by sending special command,
so that the camera can change from color to mono. The picture is clear even if the illumination is as
low as 0.1Lux.
Save/Call Preset
Preset function is that dome saves current horizontal angle and title angle of pan/tilt, zoom and
position parameters into memory. When necessary dome calls these parameters and adjusts
Pan/Tilt and camera to that position. User can save and call presets easily and promptly by using
keyboard controller or infrared controller. The camera supports up to 256 presets.
Zoom control
User can adjust zoom wide or tele by controller and get desired image.
Focus control
System defaults Auto Focus mode, that is, the lens and camera will automatically adjust the focus
to get the best image.
Focus can also be controlled manually from the controller if required. Press Focus Near or Focus
Far key to manually focus. Focus can be manual via keyboard or other controller, please refer to
control keyboard or other controller operation manual for detailed operation.
The camera will NOT auto focus in the following status.