111
Parameter
Function
UDP Port
Default value is 37778.
Max Connection
Network user max amount. The value ranges from 0 to 10.
O means there is no user can access current device.
Multiple
cast
group
Set MULCAST address and port.
Enable MULCAST function.
Remote
Host
PPPOE
Input the PPPoE user name and password you get from the
IPS (internet service provider) and enable PPPoE function.
Please save current setup and then reboot the device to
get the setup activated.
Device connects to the internet via PPPoE after reboot.
You can get the IP address in the WAN from the IP address
column.
Please note if you want to reboot the device please make
sure you have proper reboot right and there is no login user
in current device.
The email interface is shown as in Figure 7-33.
Figure 7-33
Please refer to the following sheet for detailed information.
Parameter
Function
SMTP Server
Input server address and then enable this function.
Port
Input port value here.
User Name
The sender email account user name.
Содержание DVR-x70PJ
Страница 1: ...1 DVR x70PJ 2U Series Standalone DVR User s Manual...
Страница 51: ...51 Figure 4 19 Figure 4 20 Figure 4 21...
Страница 91: ...91 Figure 6 11...