93
Please refer to chapter 4.6 Alarm Setup and Activation.
5.3.7 Detect
Please refer to chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 5-24.
• Protocol: Select corresponding PTZ protocol such as PELCOD.
• Address: input corresponding PTZ address.
• Baud rate: Select baud rate.
• Data bit: Select data bit.
• Stop bit: Select stop bit.
• Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous menu.
For detailed setup, please refer to chapter 4.9 preset/patrol/pattern/scan.
5.3.9 Display
Figure 5-24
Display setup interface is shown as below. See Figure 5-25.
• Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
• Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all your modification here only applies to
DVR local end. You need to open web or client end to refresh channel name.
• Time display: You can select to display time or not when system is playback.
• Channel display: You can select to channel name or not when system is playback.
• Resolution: There are four options: 1920×1080, 1280
×
1024(default),1280
×
720,1024
×
768.
Please note the system needs to reboot to activate current setup.
• Enable tour: Activate tour function.
• Interval: System supports 1/4/8/9/16-window tour. Input proper interval value here. The
value ranges from 5-120 seconds. In tour process, you can use mouse or click Shift to turn
on window switch function.
Stands for opening switch function,
stands for closing
switch function.
Содержание DVR-x70JE2 Series
Страница 1: ...DVR x70JE2 Series Standalone DVR User s Manual ...
Страница 77: ...68 Figure 4 21 Figure 4 22 Figure 4 23 4 5 3 Video Loss Figure 4 24 ...
Страница 80: ...71 Figure 4 27 Figure 4 28 Figure 4 29 Figure 4 30 ...
Страница 124: ...115 Figure 6 11 ...
