21
Value input blank
Picture 3.12 PTZ Control
2
、
Cruise between Points
Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on
the line
1
）
Cruise Between Points Settings
Cruise lines is connected by multiple preset points, setting procedure is as follows:
Step1: In Picture 3.10, the Direction key will turn PTZ to designated location , click Settings
button to enter Picture 3.13,
Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points
blank
，
then click Add Preset Points button, complete setting (also can add and delete cruise line
which has been set up)
Step 3: repeat step1 and step2 , until set out all the preset designated cruise lines
。
Remove Preset
：
Please input preset value in the blank, click Remove Preset button, then
remove the preset points.
Remove Cruise Line
：
Input the number of cruise line, click Remove Cruise Lines button, then
remove the cruise lines set
。
