User Manual of DVR-1670B
Page 66
First select one camera, then select one of following PTZ linkage:
l
Preset: Set the flag as “
ü
” to enable preset, in the preset number edit box and input one
preset number that has been setup already. Please refer to chapter 5.15 for preset setup.
l
Sequence: Set the flag as “
ü
” to enable sequence and input one sequence number that
has been setup already. Please refer to chapter 5.15 for sequence setup.
l
Cruise: Set the flag as “
ü
” to enable cruise. Please refer to chapter 5.15 for cruise setup.
Press “Confirm” button to save and return “Alarms” menu. Press “Cancel” button or
【
ESC
】
key to abort and return “Alamrs” menu.
Note: Please make sure that the PTZ you are using can support preset, sequence and cruise
functions. One external alarm input can trigger many cameras PTZ linkage.
Step 9: Copy the parameters to other external alarm input
You can copy the parameters of current alarm input to other external input.
Step 10: Save setup
In “Alarms” menu, press “Confirm” button to save the parameters. Press “Cancel” button or
【
ESC
】
key to abort.
Alarm relay output setup
Step 1:
In “Alarms” menu, use
【↑】【↓】
keys to select one alarm output.
Step 2: Select delay time
The delay time is when the alarm is disappeared, the alarm output will continue output time.
The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes,
10 Minutes and Manual Stop. If you select “Manual’ option, the alarm output will not stop until