XtendLan DPK-W100, Руководство пользователя

Страница: 7 / 19

5
Button description
“ON/OFF”button: It is used to power on/power off of wireless
handset monitor.
“ ”: Is used to:a) answer the calls when visitors press the call
button in outdoor call station; b) as the confirmation button when
performing the ringing tone selection; c) as the coding button when
carrying out coding between the components.
“ ”: In standby status, it is used to enter the menus of ringing tone
selections; in talk status, it is used to increase brightness.
“ ”: In talk status, it is used for reducing brightness.
“ ”: Is used to switch on the camera in outdoor call station in order
to monitor outside in standby status.
“ ”: It is used to operate an electric lock release when the monitor
is in the “talk” status.
“ ”:Is used to clear the previous code .After this operation ,you
should carry-out the coding procedure between or among the call
stations and handsets again.
“ ”
：
Make it return to the default status .After this operation ,then
it will enter the OFF status.
ID NO. display
Press the “ON/OFF” button when the handset monitor is in OFF
status, until the 2.4 inch TFT-LCD displays “Welcome” and sounds
two “Di Di” tones, then release the button. It means that the handset
monitor is entering into the ON status.
Press the “ON/OFF” button when the handset monitor is in ON status,
then the 2.4 inch TFT-LCD will show “Goodbye”and create two “Di Di”
tones, then release the button. This indicates that the handset
monitor is entering into OFF status.
When the outdoor camera is powered, a single “Di” tone indicates
that call station 1 is being viewed. If a dual “Di Di” tone is sounded
this confirms that the call station 2 is being viewed.
Coding
1).Press the “ ” and “ ” buttons at the same time when the
handset monitor is in power-on status, until the screen shows the