XtendLan DPK-W100, Руководство пользователя

Страница: 13 / 19

11
Handset intercom (Paging):
1).In standby status, if the user presses the “ ” in one handset
monitor, then the red indicators will light and enter the call status.
The screen will display“ Talking”.
2).a.If there is no response signal with 4S from called handset
monitor, after 4 “Di Di Di Di” tones, the handset will exit the
callstatus and return to standby status.
b.If receiving a response signal with 4S from the called handset
monitor, then the calling handset monitor will play the selected ring
tone, then the called handset will display “Talking” and play its
selected ring tone and the indicator light will remain lit.
3). a.If some one answers the call from called handset monitor, the
call will last 60S and enter the standby status.
b. If some one answers the call from called handset monitor, then
it will stop playing the ring tone and enter the “Talking” status (the
indicators in both handset monitors will turn from red to green and
remain lit), the talk time is 120S.
c.Meanwhile, if pressing the “ ” button in calling handset monitor,
then it will end the call and enter into the standby status.
4).In the process of talking, the user can press the “ ” button again
in any handset monitors to end the communication, then it will enter
the standby status after hearing two “Du Du”.
Note: If the handset monitor is short of power, then it will indicate
the user to charge the battery in handset monitor
.
Night-vision operation
1).When the handset is in talking status, press the “ ” button to
activate the night-vision of outdoor camera.
2).When the handset is in surveillance status, press the “ ” button
to activate the night-vision of outdoor camera.
Unlocking time setting
1).The 1st unlocking time is 1.8S (In default status, this is the 1st
unlocking method). With power disconnected from the call station,
press and hold the call button in outdoor call station, at this time
connect the power to call station, when the unit sounds a single “Di”