-2-
1 2 3
Lock Control Jumper
BUS PL
S+ S-
Main Connect Port
3.Terminal Descriptions
Placing Name Label
Use a screwdriver to unscrew the screw, and cock the host , then Placing Name Label.
•
Lock Control Jumper:
To select the lock type.
•
Main Connect Port:
To connect the bus line and
the electronic locks.
•
BUS: Connect to the bus line, no polarity.
•
PL: External lock power input, connect to the power
positive(power +).
•
S+: Lock power(+) output.
•
S-: Lock power(-) output, connect to the power(-)
input of locks(only when using the camera to power
the locks, if using the external power supply for the
locks, the S- will not be connected).
