IV. Preliminary steps
Wall mount installation
1. The soundbar can be placed on a desktop or hang on the wall (horizontally or
vertically).
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface.
Press it to enable/disable the Standby mode.
Press this button briefly to turn on the Bluetooth
®
function
and start pairing the soundbar.
The BT mode is the soundbar default mode so the unit will
automatically turn to BT once it is turn on.
Note: If another source, like USB flash drive or SD™
memory card is connected to the soundbar, the unit will
start playing audio from any of these sources.
Press to start and pause media.
Cancels the audio coming from the soundbar. Press it
again to unmute the device.
Use this button to activate the audio connection for a TV,
DVD player or receiver.
Press this button briefly to play audio stored in a USB flash
drive.
Press it briefly to play audio stored in a SD™ memory card.
Press this button briefly to switch to the optical digital
mode to play audio coming from a device connected to the
optical digital port.
Press it to decrease the audio level coming from the
soundbar.
1. ON/OFF button
2. BT button
3. Play/Pause
4. Mute
5. Coaxial button
6. USB button
7. SD™ card button
8. Optical button
9. V- button
Button
Description
Press it to increase the audio level coming from the
soundbar.
Press this button briefly to select the source device
connected to the 3.5mm input jack
Press it to go back to the previous track on your play list.
This feature is only available in USB, BT and SD™ modes.
Press it to select the next track on your play list.
This feature is only available in USB, BT and SD™ modes.
10. V+ button
11. Aux input button
12. Previous track
13. Next track
Wall mounting holes
