Xtech MALLOY XTS-621, Быстрое руководство по установке, Страница: 6 / 17

VII. Micro SD™/USB mode operation
Recommendation: Use a USB flash drive or MicroSD™ card to enable audio
playback from compatible files stored in this type of devices.
a. First, connect a USB flash drive or MicroSD™ card to the corresponding
port of the speaker.
b. The speaker will automatically detect the USB flash drive or MicroSD™
device and play the audio file. If the devices are not automatically detected,
press the MODE button to toggle through the different modes available until
the preferred mode is found.
c. Start streaming audio files directly from the source of choice.
d. As soon as the MicroSD™ / USB devices are disconnected, the speaker will
automatically enter the Bluetooth
®
mode.
VIII. FM radio mode operation
a. Connect the supplied 3.5mm cable in the speaker auxiliary port and use it
as the antenna to start receiving FM signals.
b. Press the Mode button briefly to start cycling through the available modes
and select FM radio mode.
c. Press and hold the Play-Pause/ button to start searching through the
different radio stations. The BT LED light will blink quickly during this
process.
d. Press the Play-Pause button briefly again to stop the search at any time.
e. Press the Previous track/Volume - or Next track/ buttons briefly
to switch to a different radio station, backward or forward.
Note: If during the FM mode operation an external audio source is connected,
the system will automatically switch to the mode corresponding to this audio
source. Press the Mode button to go back to FM mode.