1. LED display
2. USB port
3. MicroSD™ (TF)
card slot
This screen displays the selected input mode:
Bluetooth
®
, USB, Aux, MicroSD™ and FM, the volume
level, the track being played, and the selected channel.
Note: Remove the plastic film protector from the LED
display before using the loudspeaker.
4d. Next track
button
Enables audio playback from MP3 and WMA music files
stored in a USB flash drive.
Enables audio playback from MP3 and WMA music files
stored in a MicroSD™ card (maximum 32GB).
Allows the selection and control of the available audio
sources. Line-In, Bluetooth
®
, MicroSD™, USB and FM
tuner. The mode symbol lights up when the selected
source is being played (USB, BLUE, SD, LINE).
Control
Description
Control
Description
4. Media panel
Press this button to cycle through the different audio
modes: Line-In, Bluetooth
®
, FM, USB and SD™.
Note: the USB and SD™ sources need to be connected
to be recognized by the unit to follow this sequence. If
these sources are not connected, they will not be
recognized as an input source on the display.
Press and hold this button to turn ON/OFF the LED lights.
4a. Mode/LED
button
In USB, MicroSD™ or Bluetooth
®
mode, press this
button to start and pause media.
In FM mode, press and hold to initiate the scanning of
channels from the lowest up to the highest frequency,
and store them automatically as presets in the memory.
This button doesn’t work in the auxiliary mode.
4b. Button
Press this button to select the previous track on your
play list. Available in Bluetooth
®
, MicroSD™, USB and
FM tuner modes.
In the FM tuner mode, press this button briefly to tune to
the previous station.
Press and hold this button to decrease the volume.
This button doesn’t work in the auxiliary mode.
Press this button to select the next track on your play
list. Available in Bluetooth
®
, MicroSD™, USB and FM
tuner modes.
In the FM tuner mode, press this button briefly to tune to
the next station.
Press and hold this button to increase the volume.
This button doesn’t work in the auxiliary mode.
5. Volume knob
Use this knob to control the master volume level of the
speaker. Turn it clockwise to increase the volume or
counterclockwise to lower the volume level of the
speaker.
6. ¼in Mic input
jack
This ¼in microphone input will be used to connect a
wired microphone.
7. Aux input
Connect a CD player, digital media player, a mobile
phone or other audio source to this 3.5mm stereo line-in
connector.
8. Power On/Off
switch
Use this switch to turn the speaker on or off.
9. DC 5V/1A
micro USB port
Use this port to power the unit and/or to charge the
battery of the loudspeaker.
10. Battery status
LED indicator
The LED light will turn red to indicate that the battery is
being charged. It will turn green when the battery is fully
charged.
4c. Previous track
button
