XTA DPA SERIES, Руководство оператора

Страница: 59 / 78

DPA Series — DPA80/DPA100 Operating Instructions Page 59
ta x
SECURITY Sub-Menu
Unit Locking
Unit Locking
Lock=> -EVERYTHING-
Enter Security Code
[ ]
Unit Locking
Input Delay = Control*
Locking the Front Panel
To configure security, from the home screen, press MENU, choose the SECURITY Sub-Menu
and press ENTER.
Use the encoder or BACK and NEXT keys to select lock type:
There is a list of useful locking scenarios including the ability to specify individual locking
elements. Note that this only works to a unit level — not an individual channel level as is the
case with presets.
Choosing “User Specific” allows sections of the interface to be tailored including EQ sections
(inputs and outputs), crossovers, mutes, phase, delays, limiters, memory recall and storage.
In the case of directly editable parameters, where appropriate the choice will include
“Control” or “Display” as well as “No Lock”:
“Control” means the parameter value remains viewable, but cannot be adjusted, and
“Display” means the value is hidden and replaced by the “Parameters Locked” message.
Having chosen the locking scenario, and pressed ENTER, the unit will then request a
password to complete the procedure:
Use the MUTE and EDIT keys to enter a 6 character code — MUTE 1 = “1” etc. and EDIT 1 = “A”
etc. As you enter the final character, the unit will ask for a confirmation and the code must be
entered again to lock the unit.
If you wish to disable remote control as well as front panel locking, make sure you set the
remote interface to “Off” before locking the unit, using the “Everything” setting.
Unlocking Procedure
Navigate back to the Security Sub-Menu and re-enter your passcode to unlock the unit. There
is no limit on the number of attempts to unlock the unit.