xsto ZW4 Series, Руководство по эксплуатации

Страница: 44 / 78

40
When the goods are putting on the toe plate, Adjust the position (Y
axes) of the goods to keep balance. Keep the goods as close to the
vertical beam as possible. Tie the goods to the vertical beam with a
strap. Make sure the center of gravity of the goods is within the width
of the toe plate(X axes). the shape difference of the goods results in a
change in the horizontal distance between the center of gravity for
cargo and the vertical beam(B/2+L1), The weight of the goods should
be adjusted to avoid machine damage and safety hazards caused by
improper loading.
The relationship between the distance from the center of gravity for
cargo to the vertical beam(B/2+L1) and the weight of the goods refer
to the chart below.