1.0 SCOPE AND GENERAL
The condition of water in each geographical location and water requirements of any feed water appliance are different, hence
attention is required before setting up Xsential’s QuadRO V2 system. A
ll RO systems should be installed by a qualified
plumber or technician.
It is important that all installers read this manual and the appliance manual carefully before commencing
installation of Xsential’s QuadRO V2 system. Any wrong installation and set up may result in serious damage to the appliance.
Xsential will not be held responsible for the incorrect installation and set up of the system.
1.1 Disclaimer
Xsential warrants that its reverse osmosis systems will reject up to 96% of salt. Specification of the requirements by individual
appliances may vary. It has been proven that all Xsential's reverse osmosis systems help prevent scale build up. However, it is up
to the individual to check for compatibility of Xsential's reverse osmosis system for the intended application. Xsential will not be
responsible for any wrong installation or water configuration.
2.0 QUADRO V2 QUICK CHANGE REVERSE OSMOSIS (R.O.) SYSTEM
Read through the following instructions carefully before proceeding with the installation. Be sure to follow any special plumbing
codes in your area. Contact your local dealer if you are having problems installing it. Diagram 1 illustrates the plumbing
connections that are needed to install the system.
CAUTION:
DO NOT USE WITH WATER THAT IS MICROBIOLOGICALLY UNSAFE OR WITH WATER OF UNKNOWN
QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM.
