5.0 START UP PROCEDURE
1. With everything connected, turn on water supply valve
SLOWLY.
2. Check for leaks. (If anything is leaking shut off water, repair, then start with step 1 again.
3. Within a few seconds the water will start to run.
4. Turn off the water supply and wait for 15 minutes. This allows the system to activate the Frontier anti-scale media.
5. Once the system has sat for 15 minutes the system is now ready to be used.
6. Check for leaks daily in the first week and periodically thereafter.
6.0 SERVICE LOG
Remember to replace the cartridges regularly. This will ensure that you will recive clean filtered water for the years to come.
Service Agent
Installed/Service Date
Service By
Comment
Xsential Pty Ltd
78 Daly Street Ascot Western Australia 6104
Ph: 1300 366 295 Fax: (08) 9277 2266
[email protected] www.xsential.com.au
