XS Temp74 PT100 Vio, Инструкция по эксплуатации

Страница: 6 / 19

5
UM Temp74 PT100 Vio EN rev.1 19.05.2023
The proper functioning of the device and the safety of the operator are only guaranteed if all normal laboratory
safety regulations are observed and if all specific safety measures described in this manual are followed.
•
Basic requirements for safe use
The proper functioning of the device and the safety of the operator are only guaranteed if all of the following
points are observed:
•
the instrument may only be used in accordance with the mentioned specifications;
•
the instrument must only operate under the environmental conditions described in this manual;
•
the only part of the instrument that can be opened by the user is the battery compartment.
Perform other operations only if explicitly authorised by the manufacturer.
•
Unauthorised use
The instrument must not be operated if:
•
it’s visibly damaged (e.g. due to transport);
•
it has been stored for a long period of time under adverse conditions (exposure to direct light, heat sources or
places saturated with gas or vapours) or in environments with conditions other than those mentioned in this
manual.
•
Device Maintenance
If used correctly and in a suitable environment, the instrument requires no special maintenance procedures.
It is recommended to occasionally clean the instrument casing with a damp cloth and mild detergent. This
operation should be carried out with the instrument switched off and only by experienced and authorised
personnel. The housing is made of ABS/PC (acrylonitrile butadiene styrene/polycarbonate). This material is
sensitive to certain organic solvents, e.g. toluene, xylene and methyl ethyl ketone (MEK). If liquids were to enter
the housing, they could damage the instrument. Do not open the instrument housing: it contains no parts that can
be serviced, repaired or replaced by the user. In case of problems with the instrument, please contact your local
distributor. It is recommended to use only original spare parts. Contact your local distributor for information. The
use of non-original spare parts can lead to malfunction or permanent damage to the instrument. Furthermore, the
use of spare parts not guaranteed by the supplier can be dangerous for the user.
•
Responsibility of the instrument owner
The person who owns and uses the instrument or authorises its use by others is the owner of the instrument and
as such is responsible for the safety of all users of the instrument and third parties. The owner of the instrument
must inform users of its safe use at their place of work and of the management of potential risks and provide the
required protective equipment. When using chemicals or solvents, follow the manufacturer's safety data sheets.