16
www.XSscuba.com
Diving
If you are making an entry or
are surface swimming with the
regulator out of your mouth, be
sure to set the venturi lever in the
minus “-” position and have the
inhalation control knob turned all
the way in. Once you place the
regulator into your mouth, move
the venturi lever to the plus “+” for
the remainder of the dive. Where
you set the inhalation control knob
will be based upon environmental
conditions as well as you personal
preference. See earlier section on
the Inhalation Control Knob.
Go ahead, enjoy your dive. If you
don’t have to think about your
regulator during the dive, then we
succeeded!
As a reminder, this regulator is not
designed for coldwater use
(<50°F / 10°C)
WARNING: This regulator is
designed for use in water that is
50°F / 10°C and above. Use of this
regulator in water temperatures
below 50°F / 10°C could result
in the regulator freezing and not
performing as designed.
Post Dive Procedure
NOTE: If freshwater is readily
available, rinse your regulator
thoroughly prior to depressurizing
it. This will prevent water from
entering the first stage.
NOTE: When you remove the
