XS Instruments Temp70 PT100 vio, Инструкция по эксплуатации

Страница: 6 / 19

5
UM Termometri Temp70 PT100 Vio ENG rev.0 05.04.2021
•
Use according to destination
This instrument is designed exclusively for electrochemical measurements both in the laboratory and
directly in the field.
Pay attention to the technical specifications shown in the INSTRUMENT FEATURES / TECHNICAL DATA table;
any other use is to be considered unauthorized.
This instrument has left the factory in perfect technical and safety conditions.
The regular functionality of the device and the operator safety are guaranteed only if all the normal
laboratory safety standards are respected and if all the specific safety measures described in this manual
are observed.
•
Basic requirements for safe use
The regular functionality of the device and the operator safety are guaranteed only if all the following
indications are respected:
•
The instrument can be used in accordance with the specifications mentioned above only.
•
The instrument must operate exclusively in the environmental conditions indicated in this manual.
•
The only part of the instrument that can be opened by the user is the battery compartment.
Any other operation have to be authorised by the manufacturer.
•
Unauthorised use
The instrument must not run, if:
•
It is visibly damaged (for example due to transportation).
•
it has been stored for a long period of time in adverse conditions (exposure to direct light, heat sources
or places saturated by gas or vapours) or in environments with conditions different from those
mentioned in this manual.
•
Device maintenance
If used correctly and in a suitable environment, the instrument does not require maintenance procedures.
It is recommended to occasionally clean the instrument case with a damp cloth and a mild detergent. This
operation must be performed with the instrument off and by authorized personnel only.
The housing is in ABS/PC (acrylonitrile butadiene styrene /polycarbonate). This material is sensitive to some
organic solvents, for example toluene, xylene and methyl ethyl ketone (MEK).
If liquids get into the housing, they could damage the instrument.
Do not open the instrument housing: it does not contain parts that can be maintained, repaired or replaced
by the user. In case of problems with the instruments, contact your local distributor.
It is recommended to use original spare parts only. Contact your local distributor for information. The use
of non-original spare parts can lead to malfunction or permanent damage to the instrument. Moreover, the
use of spare parts not guaranteed by the supplier can be dangerous for the user himself.
•
Responsibility of instrument owner
The person who owns and uses the tool or authorizes its use by other people is the owner of the tool and
is responsible for the safety of all users of the tool and third parties.
The owner of the instrument must inform users of the use of the same safely in their workplace and on the
management of potential risk, also providing the required protective devices.
When using chemicals or solvents, follow the manufacturer’s safety data sheets.