XS Instruments Temp70 PT100 vio, Инструкция по эксплуатации

Страница: 13 / 19

12
UM Termometri Temp70 PT100 Vio ENG rev.0 05.04.2021
P7.2 Offset settings
Enter into this menu to adjust the offset.
Note : enter in the menu only if the temperature probe is connected.
If menu P 7.2 is accessed without a temperature probe connected, the display will show an error
message: “CONNECT THE PROBE”, followed by the flashing of the icon .
Note : if the display shows the temperature of the channel 1, the Offset menu settings will be the
one of the channel 1. if the display shows the channel 2, enter to modify the offset of the channel
2. If the display shows the screen with both channels simultaneously, the user will select which
offset has to be modified: channel 1 or channel 2.
P7.3 Calibration data
Access this menu to get information about the last offset calibration performed .
The following screens will automatically scroll on the display (the view changes according to the one
selected):
Note : the message “NO CAL DATA” will be shown for each channel if the offset has been never
modified or a reset has been effected from the menu P7.6.
P7.4 Select resolution
Access to this menu to select the desired resolution for the temperature reading:
•
0,1
•
0,01 (Factory Default settings)
Note : changing the temperature resolution, the temperature resolution for both channels will
change too.
P7.5 Stability filter
To consider the reading of a value truthful, we recommend waiting for the measurement stability, indicated
by the icon . When the measurement is not stable, four red flashing bands appear on the
display. Access this menu to change the measurement stability criterion:
•
Low : changes less than or equal to 3 hundredth of a degree, the stability icon is fixed and means that the
value is stable;
•
Med : : changes less than or equal to 2 hundredth of a degree, the stability icon is fixed and means that
the value is stable;
•
High : : changes less than or equal to 1 hundredth of a degree, the stability icon is fixed and means that
the value is stable.
View of the
Channel 1
View of the
Channel 2
View of the double
channel
First
screen:
Date and time of
the offset setting
for the channel 1
Date and time of
the offset
setting for the
channel 2
Date and time of
the offset setting
for the channel 1
Second
screen:
Set offset value for
the channel 1
Set offset value
for the channel
2
Set offset value for
the channel 1
Third
screen:
Date and time of
the offset setting
for the channel 2
Fourth
screen:
Set offset value
for the channel 2