Xray XT4, Инструкция по эксплуатации

Страница: 43 / 48

43
902312
SH M3x12
903310
SFH M3x10
962030
S 3x6x0.3
EXTRA-LONG BATTERY HOLDER
(#366115)
LONG BATTERY HOLDER
(#366114)
➌ ➌
➋
➋
➊
➊
➍ ➍
ALTERNATIVE 1
FORWARD WEIGHT BALANCE POSITION
(INITIAL SETTING)
ALTERNATIVE 2
REARWARD WEIGHT BALANCE POSITION
NOTE
ORIENTATION
(INITIAL SETTING)
The foam battery spacer can be installed
either in front of or behind the battery.
FRONT BATTERY POSITION: More traction on FRONT suspension,
more steering, recommended for medium- and high-traction tracks.
REAR BATTERY POSITION: More traction on REAR suspension,
more stable, recommended for medium - and low-traction tracks.
Using the standard battery holder
positions the battery to the REAR.
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
➊
➋
➌
➎
➏
➐
➑
WING CUTTING LINE OPTIONS
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
INITIAL POSITION
MORE TRACTION
LESS TRACTION
BODY REAMER (HUDY #107600)
8. FINAL ASSEMBLY
XRAY LEXAN REAR WINGS
#323510 1.0mm OPTION
#323511 1.5mm OPTION
#323513 1.0mm RANK OPTION
#323517 1.0mm TEC
OPTION
#363510 1.0mm INCLUDED
#363511 1.5mm OPTION
#363512 2.0mm OPTION
#323515
LEXAN REAR WING
CENTER FIN - ZAP (2)