15
TRAck wIDTH
wHEElBASE
980317
P 3x17
941319
BB 13x19x4
901504
SB M5x4
980263
P 2.5x13
940814
BB 8x14x4
Use HUDY Ball-Bearing
Grease for servicing:
#106220 - Standard
#106221 - Extra
#106222 - Premium
➊
➋
L=R
➌
➍
➑
➐
➏
➍
➎
ASSEMBLED VIEW
4. REAR SUSPENSION
35 1301 BODY POSTS
35 2632 ALU ADJ. TURNBUCKLE 64MM M5 L/R - SWISS 7075 T6 (2)
35 3131 REAR UPPERt INNER CAMBER LINK BALL JOINT (2)
35 3152 REAR UPPER OUTER CAMBER LINK BALL JOINT (2)
35 3160 MOUNTING BALL 6.8 (4)
35 3170 PIVOT BALL 6.8 (4)
35 3351 XB808 COMPOSITE REAR HUB CARRIER - V2
35 3370 SET OF COMPOSITE REAR HUB CARRIER SHIMS
35 3521 XB9 REAR WING POSTS
35 3559 COMPOSITE REAR WING MOUNT BRACE (2)
35 5211 CVD DRIVE AXLE - HUDY SPRING STEEL™
35 5221 CVD UNIVERSAL DRIVE SHAFT - HUDY SPRING STEEL™
BAG
2x
L=R
Ensure that the rear upright moves freely.
If it does not move freely, use sandpaper
to thin both wheelbase adjustment shims.
When using outside position on the hub, use
only outside position on the arm.
When using inside position on the hub, use
only inside position on the arm.
The outside hole offers great stability and is
recommended for bumpy open tracks. Inside
hole offers great amount of steering and is
recommended for flat, technical tracks.
Shims for
wheelbase
adjustment
L=R
L=R
Graphite Grease
(HUDY #106210)
2mm
Check for free
movement
To tighten the setscrew you can also use the
HUDY 17mm Wheel Nut Tool #107570
3x17
2.5x13
8x14x4
13x19x4
Follow the TECH TIP on page 5
for drive shaft pin servicing
Do not overtighten the self-locking
nut. Overtightening may result in
suspension binding.
If the rear upright does not move
freely, use a HUDY Arm Reamer
to resize the hole.
ARM REAMER
2mm
OFFSET wHEEl AXlES
#355250 0mm (STANDARD)
#1mm (OpTION)
#2mm (OpTION)
2.5mm
INITIAL POSITION
IMPORTANT!
35 5237 CVD DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
35 5250 ALU WHEEL AXLE - HARD COATED (2)
35 7331 XB808 REAR LOWER OUTER PIVOT PIN SCREW 3MM (2)
90 1504 HEX SCREW SB M5x4 (10)
90 2310 HEX SCREW SH M3x10 (10)
90 2318 HEX SCREW SH M3x18 (10)
90 2320 HEX SCREW SH M3x20 (10)
90 2322 HEX SCREW SH M3x22 (10)
90 5314 SCREW PHILLIPS 3.0x14 (10)
94 0814 HIGH-SPEED BALL-BEARING 8x14x4 BLUE COVERED (2)
94 1319 HIGH-SPEED BALL-BEARING 13x19x4 BLUE COVERED (2)
96 0030 NUT M3 (10)
98 0263 PIN 2.5x13 (10)
98 0317 PIN 3x17 (10)
(HUDY #107633)
905314
902320
902322
980317
901504
940814
941319
357331
960030
902310
980263
960030
902318
960030
902318
960030
353521
353559
353521
353351
355250
353370
355211
355237
355221
353170
353152
352632
353160
353131
351301