21
CAMBER
ROLL CENTER
L=R
PIVOT BALLS MUST MOVE FREELY
During initial assembly, tighten each composite hex nut until the pivot ball starts to
bind, then loosen slightly. Verify that the pivot balls move freely.
IMPORTANT
Check that the pivot balls move freely after every run especially in dusty conditions.
Tighten composite hex nuts using
HUDY tool #107581
2.5mm
2.5mm
2.5mm
357256
SHIM 6x13x1
353380
SHIM 4x7.5x1
353381
SHIM 4x7.5x2
(HUDY #107634)
ARM REAMER
If the front upper arm does not move freely use a
HUDY Arm Reamer to resize the holes of the arms.
FRONT SUSPENSION
DETAIL
OPTION shims from the Last Aid Bag can be used for
Roll Center adjustment.
#353380 - Alu shim 4x7.5x1mm
#353381 - Alu shim 4x7.5x2mm
Apply WD-40 to protect against rust
CUTAWAY VIEW
HUDY Tool Allen 2.5mm
HUDY Tool Allen 2.5mm
SHORT L
ONG
HUDY Tool Allen Ball 2.5mm
Marked (L) = Marked (L)
Marked (R) = Marked (R)
22mm
102.3mm
102.3mm
2x
1mm
L=R
L=R
L=R
2x
2x
2x
OPTION
#357253 Brass Adjusting Nut M15x1
Содержание XB8E
Страница 1: ......