Xray XB2C'20, Инструкция по эксплуатации

Страница: 44 / 46

2
BEFORE YOU START
This is a high-competition, high-quality RC car intended for persons aged 16
years and older with previous experience building and operating RC model
racing cars. This is not a toy; it is a precision racing model. This model racing
car is not intended for use by beginners, inexperienced customers, or by
children without direct supervision of a responsible, knowledgeable adult. If
you do not fulfill these requirements, please return the kit in unused and
unassembled form back to the shop where you have purchased it.
Before building and operating your XRAY, YOU MUST read through all of the
operating instructions and instruction manual and fully understand them to
get the maximum enjoyment and prevent unnecessary damage.
Read carefully and fully understand the instructions before beginning assembly.
Make sure you review this entire manual, download and use set-up book from
the web, and examine all details carefully. If for some reason you decide this is
not what you wanted or expected, do not continue any further. Your hobby dealer
can not accept your kit for return or exchange after it has been partially or fully
assembled.
Contents of the box may differ from pictures. In line with our policy of continuous
product development, the exact specifications of the kit may vary without prior
notice.
SAFETY PRECAUTIONS
Contains:
LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
WARNING: This product contains a chemical known to the state of California
to cause cancer and birth defects or other reproductive harm.
CAUTION: CANCER HAZARD
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash
thoroughly after using. DO NOT use product while eating, drinking or using
tobacco products. May cause chronic effects to gastrointestinal tract, CNS,
kidneys, and blood. MAY CAUSE BIRTH DEFECTS.
When building, using and/or operating this model always wear protective
glasses and gloves.
Take appropriate safety precautions prior to operating this model. You are
responsible for this model‘s assembly and safe operation! Please read the
instruction manual before building and operating this model and follow all
safety precautions. Always keep the instruction manual at hand for quick
108211 PLASTIC SET-UP BOARD DECAL FOR 1/10
108201 FLAT SET-UP BOARD FOR 1/10 TOURING CARS
108205 FLAT SET-UP BOARD FOR 1/10 TOURING CARS - DARK GREY
108203 FLAT SET-UP BOARD FOR 1/10 TOURING CARS - SILVER GREY
108204 FLAT SET-UP BOARD FOR 1/10 TOURING CARS - TITAN
107701 CHASSIS DROOP GAUGE SUPPORT BLOCKS 20MM FOR 1/8 - LW(2)
181090 HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS
106036 EJECTOR PIVOT PIN & ALTERNATING PIVOT 2.5MM FOR #106000
106000 HUDY DRIVE PIN REPLACEMENT TOOL (FOR 3MM PINS)
107742 HUDY ADJUSTABLE RIDE HEIGHT GAUGE 20-30MM
107740 HUDY ADJUSTABLE RIDE HEIGHT GAUGE 14-20MM
181030 HUDY SPRING STEEL TURNBUCKLE WRENCH 3 MM
reference, even after completing the assembly. Use only genuine and original
authentic XRAY parts for maximum performance. Using any third party parts
on this model will void guaranty immediately.
Improper operation may cause personal and/or property damage. XRAY
and its distributors have no control over damage resulting from shipping,
improper construction, or improper usage. XRAY assumes and accepts no
responsibility for personal and/or property damages resulting from the use
of improper building materials, equipment and operations. By purchasing
any item produced by XRAY, the buyer expressly warrants that he/she is in
compliance with all applicable federal, state and local laws and regulation
regarding the purchase, ownership and use of the item. The buyer expressly
agrees to indemnify and hold harmless XRAY for all claims resulting directly
or indirectly from the purchase, ownership or use of the product. By the act
of assembling or operating this product, the user accepts all resulting liability.
If the buyer is not prepared to accept this liability, then he/she should return
this kit in new, unassembled, and unused condition to the place of purchase.
IMPORTANT NOTES – GENERAL
• This product is not suitable for children under 16 years of age without the
direct supervision of a responsible and knowledgeable adult.
• Carefully read all manufacturers warnings and cautions for any parts used
in the construction and use of your model.
• Assemble this kit only in places away from the reach of very small children.
• First-time builders and users should seek advice from people who have
building experience in order to assemble the model correctly and to allow
the model to reach its performance potential.
• Exercise care when using tools and sharp instruments.
• Take care when building, as some parts may have sharp edges.
• Keep small parts out of reach of small children. Children must not be
allowed to put any parts in their mouth, or pull vinyl bag over their head.
• Read and follow instructions supplied with paints and/or cement, if used
(not included in kit).
• Immediately after using your model, do NOT touch equipment on the
model such as the motor and speed controller, because they generate high
temperatures. You may seriously burn yourself seriously touching them.
• Follow the operating instructions for the radio equipment at all times.
• Do not put fingers or any objects inside rotating and moving parts, as this
may cause damage or serious injury as your finger, hair, clothes, etc. may
get caught.
• Be sure that your operating frequency is clear before turning on or running
your model, and never share the same frequency with somebody else at the
same time. Ensure that others are aware of the operating frequency you
are using and when you are using it.
• Use a transmitter designed for ground use with RC cars. Make sure that no
one else is using the same frequency as yours in your operating area. Using
the same frequency at the same time, whether it is driving, flying or sailing,
can cause loss of control of the RC model, resulting in a serious accident.
• Always turn on your transmitter before you turn on the receiver in the car.
Always turn off the receiver before turning your transmitter off.
• Keep the wheels of the model off the ground when checking the operation
of the radio equipment.
• Disconnect the battery pack before storing your model.
• When learning to operate your model, go to an area that has no obstacles
that can damage your model if your model suffers a collision.
• Remove any sand, mud, dirt, grass or water before putting your model
away.
• If the model behaves strangely, immediately stop the model, check and
clear the problem.
• To prevent any serious personal injury and/or damage to property, be
responsible when operating all remote controlled models.
• The model car is not intended for use on public places and roads or areas
where its operation can conflict with or disrupt pedestrian or vehicular traffic.
• Because the model car is controlled by radio, it is subject to radio
interference from many sources that are beyond your control. Since radio
interference can cause momentary loss of control, always allow a safety
margin in all directions around the model in order to prevent collisions.
• Do not use your model:
- Near real cars, animals, or people that are unaware that an RC car is being
driven.
- In places where children and people gather
- In residential districts and parks
- In limited indoor spaces
- In wet conditions
- In the street
- In areas where loud noises can disturb others, such as hospitals and
residential areas.
- At night or anytime your line of sight to the model may be obstructed or
impaired in any way.
To prevent any serious personal injury and/or damage to property, please be
responsible when operating all remote controlled models.
CUSTOMER SUPPORT
XRAY Europe
K Vystavisku 6992
91101 Trenčín
Slovakia, EUROPE
Phone: 421-32-7401100
Fax: 421-32-7401109
E-mail: info@teamxray.com
We have made every effort to make these instructions as easy to understand as
possible. However, if you have any difficulties, problems, or questions, please do not
hesitate to contact the XRAY support team at info@teamxray.com. Also, please visit
our Web site at www.teamxray.com to find the latest updates, set-up information,
option parts, and many other goodies. We pride ourselves on taking excellent care
of our customers.
You can join thousands of XRAY fans and enthusiasts in our online community at:
www.teamxray.com
XRAY USA
RC America, 2030 Century Center Blvd #15
Irving, TX 75062
USA
Phone: (214) 744-2400
Fax: (214) 744-2401
E-mail: xray@rcamerica.com
FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT.
107701
106000 106036
181090
107742
107740
181030
293110
108190
188990
183011
107090
107601
177035
175535
112045
132045
111545
153055
108160
298100
199060
199270
107855
109880
199183
104004
109801
105520
105550
109840
109860
107880
108905
108960
108201
108205
108203
108204
+
293110 HUDY BRUSHLESS RC FAN 30MM
293110XL HUDY BRUSHLESS RC FAN 30MM - SET OF 12PCS
108190 HUDY ALU TRAY FOR PARTS
109801 HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF & SHOCKS
109880 HUDY ALU TRAY FOR ACCESSORIES & PIT LED
107855 HUDY PIT LED
199183 HUDY CAR BAG - 1/10 OFF-ROAD
104004 HUDY AIR VAC - VACUUM PUMP - 1/10 OFF-ROAD
105520 WHEEL ADAPTER FOR 1/10 TOURING CARS - 12MM
105500 HUDY UNIVERSAL TIRE BALANCING STATION
108905 UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 OFF-ROAD CARS
109860 HUDY ALU TRAY FOR SET-UP SYSTEM
107880 CHASSIS BALANCING TOOL (2)
188990 HUDY PROFESSIONAL BODY SCISSORS
108960 ALU NUT FOR 1/10 OFF-ROAD SET-UP SYSTEM (4)
298100 HUDY TIN ROUND BOX 80X30MM
108160 HUDY 1/10 OFF-ROAD CAR STAND - V2
199060 HUDY ALU TOOL STAND
109840 HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF ASSEMBLY
199270 HUDY LIPO SAFETY BAG
183011 HUDY PROFESSIONAL MULTI TOOL
107090 HUDY BEARING CHECKING TOOL
107601 LIMITED EDITION - REAMER FOR BODY 0-9MM + COVER - SMALL
177035 LIMITED EDITION - SOCKET DRIVER # 7.0MM
175535 LIMITED EDITION - SOCKET DRIVER # 5.5MM
112045 LIMITED EDITION - ALLEN WRENCH # 2.0MM
132045 LIMITED EDITION - ALLEN BALL REPL. TIP # 2.0MM
111545 LIMITED EDITION - ALLEN WRENCH # 1.5MM
153055 LIMITED EDITION - SLOTTED SCREWDRIVER # 3.0MM - LONG
For more information please visit