Xray X1 2019, Инструкция по эксплуатации

Страница: 8 / 36

8
1. FRONT SUSPENSION
902306
SH M3x6
902306
SH M3x6
903308
SFH M3x8
903308
SFH M3x8
303123-O
SHIM 3x6x2
303123-O
SHIM 3x6x2
3x6x2mm
3x6x2mm
3x6x2mm
3x6x2mm
STANDARD TRACK-WIDTH
WIDE TRACK-WIDTH
(INITIAL SETTING)
ALTERNATIVE 1
ALTERNATIVE 2
These shims adjust the roll-center of the front bottom arm as well as the front ride height. The
thickness of the shim depends on the tire diameter. For initial setting, use the 3x6x2mm shim.
IMPORTANT!
Use the same shim thickness under all 4 posts.
These shims adjust the roll-center of the front bottom arm as well as the front ride height. The
thickness of the shim depends on the tire diameter. For initial setting, use the 3x6x2mm shim.
IMPORTANT!
Use the same shim thickness under all 4 posts.
Standard track-width setting is used for standard F1
front tires such HUDY, RIDE, HOT RACE.
To make sure that you use the correct setting,
measure the track-width with the tires; the track-
width must be maximum 190mm.
Wide track-width setting is used for the narrow F1
front tires such as Volante.
To make sure that you use the correct setting,
measure the track-width with the tires; the track-
width must be maximum 190mm.
#371017
CHASSIS - 2.0mm ALU FLEX - V3
#371016
CHASSIS - 2.0mm ALU - V3
#371019
CHASSIS - 2.5mm GRAPHITE - HARD
2.5mm CHASSIS HARD
For low-traction conditions, as it improves
overall traction.
ALU CHASSIS
Makes the car easier to drive and more stable
in high-traction conditions or with tires that
generate oversteering problems.
#372087
X1 GRAPHITE FRONT ARM BRACE 2.5mm
3x8mm
The brace makes the car easier to drive. Recommended for
high-traction conditions.
2x
2x
DETAIL
DETAIL
INITIAL SETTING