18
303129
SHIM 3x6x2
303127-K
SHIM 3x6x4
H = Hitec (24T)
F = Futaba, Robe (25T)
K = KO, JR, Airtronics, Sanwa (23T)
940508
BB 5x8x2.5
930306
BB 3x6x2.5
903308
SFH M3x8
2x
L=R
303129
SHIM 3x6x1
3x6x2.5mm
3x6x2mm
3x6x4mm
8mm THREAD
10mm THREAD
approximately 47mm
NOTE
ORIENTATION
6mm THREAD
NOTE
ORIENTATION
STEERING LINKS
SERVO LINK
Adjust servo link to fit your servo
65.4mm
INITIAL SETTING
(3x6x1mm)
3x1mm & 1x2mm shims
To change Ackermann angle,
use 2 identical shims (of same
thickness) between the alu
steering plate and ball ends.
2x
2x
L=R
THREAD
THREAD
Tighten the screws gently but fully, and
then loosen 1/3 turn so the composite
dual-servo saver moves freely.
➊
tighten fully
➋
loosen 1/3 ccw
➌
check free movement
(120° CCW)
BEARING OIL
(HUDY #106230)
OIL
HUDY ALU SERVO HORNS
#293501 KO, Sanwa - 23T
#293502 Hitec - 24T
#293503 Futaba - 25T
HUDY CLAMP ALU SERVO HORNS
#293407 KO, Sanwa - 23T
#293408 Hitec - 24T
#293409 Futaba - 25T
For more in-corner steering and better steering response,
aluminum servo horns may be used.
IMPORTANT!
When the aluminum horn is used, the steering servo saver is not
used. This increases the risk of breaking the servo in serious crashes.
Install the pivot balls with Professional
Multi Tool (HUDY #183011)
#302612-O
ALU ADJ. TURNBUCKLE M3
L/R 39mm ORANGE - SWISS
7075 T6 (2)
#302610
ADJ. TURNBUCKLE L/R 40mm
HUDY SPRING STEEL (2)
5x8x2.5mm
4. STEERING
INITIAL SETTING
#302525
ALU DUAL SERVO SAVER ARM
We recommend using the aluminum dual-servo
saver arms when better steering response is needed.
Also recommended for asphalt tracks.
THREAD
THREAD
OIL
NOTE
ORIENTATION
BEARING OIL
(HUDY #106230)
#302544-O
ALU SHIM FOR RADIAL PLAY ADJUSTMENT
OF STEERING ARM - ORANGE (2)
Содержание T4F
Страница 1: ......