5
KIT
The XRAY T2’008 comes partially pre-assembled. Before starting assembly, disassemble the chassis parts, noting the position and orientation of the parts, particularly
the bulkheads. Keep the parts, including the screw hardware, close at hand. In the assembly steps that follow, each section begins with a parts list. Parts indicated
with
STYLE B
are from the previously disassembled chassis parts in section 0.
CA
At the beginning of each section is an exploded view of the parts to be assembled. There is also a
list of all the parts and part numbers that are related to the assembly of that section.
The part descriptions are color-coded to make it easier for you to identify the source of a part.
Here are what the different colors mean:
STYLE A - indicates parts that are included in the bag marked for the section.
STYLE B
-
indicates parts that were set aside in Section 0.
STYLE C - indicates parts that are already assembled from previous steps.
0. KIT
(FACTORY PRE-ASSEMBLED)
COLOR INDICATIONS
CORRECT
INCORRECT
Lightly file edges of battery slots to remove
sharp edges.
Please note that the US Foam-Spec 3.5mm
Extra-Thick Chassis requires the battery slots to
be filed more than the standard 2.5mm thick
chassis.
Do not file battery slots too much, or batteries
may protrude below the chassis bottom.
To protect and seal edges of graphite parts, sand edges smooth and then apply CA glue.
Do this for: chassis edges; filed battery slots, countersunk holes for front bumper screws.
For the US extra-thick chassis, we recommend rounding the bottom forward edge of the
chassis (using a file or sandpaper).
CA
Apply only a bit of CA glue on
the countersunk holes
903306
302019
303051
303012
301124 (EU RUBBER-SPEC 5-CELL)
301125 (EU RUBBER-SPEC 6-CELL)
301126 (US FOAM-SPEC)
302019
303013
For the US extra-thick chassis, we recommend rounding the
bottom forward edge of the chassis (using a file or sandpaper).
303012
903306
30 1124 T2‘008 CHASSIS 2.5MM GRAPHITE - 5-CELL - RUBBER-SPEC
30 1125 T2‘008 CHASSIS 2.5MM GRAPHITE - 6-CELL - RUBBER-SPEC
30 1126 T2‘008 CHASSIS 3.5MM GRAPHITE - 6-CELL - FOAM-SPEC
30 2019 T2‘008 ALU FRONT LOWER SUSP. ADJUST. BULKHEAD
30 3012 T2‘008 ALU REAR LOWER SUSP. ADJUST. BULKHEAD
30 3013 T2‘008 RIGHT ALU LAYSHAFT BULKHEAD
30 3051 T2‘008 MOTOR MOUNT BULKHEAD
90 3306 HEX SCREW SFH M3x6 (10)
Содержание T2008
Страница 1: ...1 1 0 LUXURY TOURING CAR...
