Xpresskit XK09-DLPKHO, Руководство по установке

Страница: 16 / 19

Module Programming - Install Types 1, 2, 3, 4, 6, 7, 8 and 9
Page 16
Refer to the LED Diagnostics section on page 18 for more information and for troubleshooting purposes.
2
3
Insert the key into the ignition barrel and turn it to ON
.
Wait for the LED to turn OFF.
(for Smart Key vehicles,
i press the Push-to-Start button twice
without pressing on the brake pedal)
nsert the OEM remote into the key port then
Turn the key back to the OFF position and remove it from the ignition barrel
(for Smart Key vehicles, press the Push-to-Start button once). The module
is now programmed and ready to use.
1
The LED turns ON solid.
If connected in D2D:
Connect the 4-pin D2D and the 20-pin harnesses.
If connected in W2W:
Connect the 20-pin harness.
Caution! The 20-pin connector can be easily plugged in backwards.
4-pin
20-pin
&
KEY
Key at ON or press PTS
START
OFF
ON
KEY
Remove Key
START
OFF
ON
On Solid
Off
Module Programming - Install Type 5
3
4
Turn the key back to the OFF position and remove it from the ignition barrel.
The module is now programmed and ready to use.
Insert and turn the key to ON After flashing, the LED turns ON
solid for 3 seconds and then turns OFF. .
KEY
Remove Key
ON
START
OFF
1
The LED turns ON solid.
If connected in D2D:
Connect the 4-pin D2D and the 20-pin harnesses.
If connected in W2W:
Connect the 20-pin harness.
Caution! The 20-pin connector can be easily plugged in backwards.
4-pin
20-pin
& &
KEY
Key at ON
START
OFF
ON
2
Press and release the programming button. The LED flashes rapidly.
Refer to the LED Diagnostics section on page 18 for more information and for troubleshooting purposes.
On Solid
On x 3 Secs Off
&
Press & Release Flashes
Rev.: 20120221
Platform: XK09
Firmware: DLPKHO
The Mobile Integration Systems
© 2012 Directed. All rights reserved.