www.xprgroup.com
2
1 ABOUT THIS DOCUMENT
2 SAFETY
This operation and assembly manual describes the electronic cabinet lock . It is part of the product and PXP-CL-MF con-
tains important information that is necessary for proper operation and maintenance.
This operating and assembly manual is valid for all versions of PXP-CL-MF and is intended for technicians responsible for
assembling and disassembling, as well as for end customers.
Read this operating and assembly manual carefully for smooth and safe operation and follow the instructions given in it
before operating the cabinet lock.
Keep the operating and assembly manual in a safe place.
After the installation, hand over the manual to the end customer and make sure that the customer familiar with its use.
XPR does not assume any responsibility for disruptions or hazards such as non-access to injured personnel, malfunc-
tions, property damage or other damages resulting from non-compliance with this operating and assembly manual or
incorrectly configured cabinet locks.
If there are still any doubts after reading this operating and assembly manual, please contact your respective dealer or
XPR directly.
1.1 Warnings
2.1 Proper use
Warnings warn against hazards that may arise when using the cabinet locks. There are two levels of warnings that can
be identified based on the signal word.
Signal word Significance:
CAUTION - Indicates a hazard with a low risk that can lead to mild or moderate injury if not avoided.
ATTENTION - Indicates a hazard that results in property damage.
The electronic cabinet lock PXP-CL-MF is intended to be installed in cabinet doors and for opening the doors.
The cabinet lock can be installed in doors with a maximum thickness of 20 mm. The different versions of the locking
lever enable it to be used in many commonly available cabinet doors.
PXP-CL-MF can be used only indoors.
2.2 Improper use
The PXP-CL-MF must not be used for locking up supplies required in case of emergencies (for example defibrillator,
emergency medication, fire extinguishers, etc.).
2.3 General safety instructions
Follow these basic safety instructions when using the cabinet lock:
Installation and battery replacement should only be done by qualified technicians according to the instructions in this
operating and assembly manual.
Do not use the cabinet lock in potentially explosive areas.
Do not make any kind of modifications to the cabinet lock, with the exception of those described in this operating and
assembly manual.
Do not apply paints or acids to the cabinet lock.
Do not heat the cabinet lock and battery beyond the specified storage temperature.
Use only original spare parts and accessories to prevent malfunctions and damages.
