1.
Press
3,1.
To Exit press 0, A
2.
Buzzer Code
Table2.
Select the
from the
Buzzer Code
Buzzer Mode
1
Remote OFF
2
Reader OFF
3
All ON
4
All OFF
Table2.
Note 1:
When “Remote OFF” is selected, the buzzer is OFF in the remote relay unit. In the biometric reader and in the keypad
the buzzer is ON.
Note 2:
When “Reader OFF” is selected, the buzzer is ON in the remote relay unit. In the biometric reader and in the keypad
the buzzer is OFF.
11.0 P
B100PAD-SA
K
ROGRAMING
WITH
EYPAD
11.7 Buzzer Se ngs
3.
Press
to confirm.
A
Swipe Master/Admin finger or enter Admin PIN.
The Biometric reader starts to blink.
BL
BL
BL
BL
14
www.xprgroup.com
ADMIN PIN or
x 5
7
www.xprgroup.com
8.0 Q
P
UICK ROGRAMMING
8.1 Adding Master Finger and delete all users
1. There is 1 Master Finger. The master finger can enroll/delete user and all the other se ngs. The Master finger
can be changed ONLY with the jumper.
2. There are 2 Administrator Fingers. The administrator can do all the things that Master can do. The Master can
delete the Administrator, but the Administrator can not delete the Master.
3. The User can be assigned to one of the 8 available User Groups. With the Quick programming feature, the Users
are assigned in Group 1 or Group 2. For most of the installaons 2 groups are enough and can be used as: Group
1 for permanent residents, Group 2 for guest and visitors.
4. The user can be deleted by swiping its user finger or by deleng the group in which that user is enrolled. Once
the Group of users is deleted, all the users within that group will be deleted.
5. The Groups are not limited by the number of users. (ex. Group 1 can contain 20 users, Group 2 can contain 70
users, but the total number must remain bellow 97...)
1.Push dip switch no.2 in position ON.
2.Reset the Power of the device.
3.Wait for One long + mulple short beeps
4.Put the dip switch in position OFF.
(short beeps will stop)
5.Wait for the bo om row LEDs to blink in Orange.
6.Swipe the Master finger
. (Unl Ok Beep)
min.6 mes
Note:
Aer enrolling the Master finger the device will auto-Reset (wait for 7 seconds and the OK beep).
Note:
This procedure also deletes all the users and administrators previously enrolled.
<Blinking
Blinking>
x 6
1 2
ON
1 2
ON
No.2
No.2
