6
www.xprgroup.com
7.0 INDICATION
4 x Tricolor Programming LEDs
(red, green, orange)
Tricolor Status LED
Green - Access Granted
Red - Access denied
Orange - Idle Mode
OK Beep
- short + long beep
- 3 short beeps
Error Beep
Swipe Again - 2 short beeps
6.0 R
S
T
ECOMMENDED WIPING ECHNIQUE
Follow the below instructions for correct finger swiping
Starting from the first finger joint, place the selected finger on the swipe
sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe:
Tricolour Status LED turns green + OK Beep(short + long
beep)
For an invalid or misread swipe:
Tricolour Status LED turns red + Error Beep
( 3 short beeps)
6.1 Taping the sensor
Tap the sensor to enter Submenu or to confirm a command
Enter and confirm
6.2 Scrolling the sensor up and down
Scroll the sensor DOWN to navigate the programming menu
Scroll the sensor UP to exit the programming menu
Navigate the Programming Menu
Exit the Programming Menu
1.
Press
3,2.
To Exit press 0, A
2.
Backlight Code
Table 3.
Select the
from the
Backlight Code
Backlight Mode
1
Remote OFF
2
Reader OFF
3
All ON
4
All OFF
Table 3.
3.
Press
to confirm.
A
11.0 P
B100PAD-SA
K
ROGRAMING
WITH
EYPAD
11.8 Backlight Se ngs
Note 1:
When “Remote OFF” is selected, the backlight is OFF in the remote relay unit. In the biometric reader and in the
keypad the backlight is ON.
Note 2:
When “Reader OFF” is selected, the backlight is ON in the remote relay unit. In the biometric reader and in the
keypad the backlight is OFF.
15
www.xprgroup.com
Swipe Master/Admin finger or enter Admin PIN.
The Biometric reader starts to blink.
BL
BL
BL
BL
ADMIN PIN or
x 5
