Screen
You can set the mapping between the display area of the current screen and the device.
If multiple monitors are used in duplicate mode, the work area of the device will be mapped
to all monitors. When the pen moves in the work area, the cursor on all monitors will move at
the same time.
If multiple monitors are used in extend mode, go to the monitor tabs to select one of the
monitors that the work area of the device will be mapped to. XPPen drawing display is
selected by default.
There are two available options to set the screen mapping area:
1) Set full screen: After you select it, the device will be mapped to the whole area of the
selected monitor.
2) Customize screen area: There are three ways to customize the screen area:
