XPower X-3300, Руководство пользователя

Страница: 28 / 30

SYMPTOM POSSIBLE CAUSE ACTION
Motor not
running
Switched off
Ma k e sure unit is plugged in and switch is turned to
ON mode
Power failure Chec k outlet/change to another outlet
Wiring failure Contact XPOWER for service/repair.
Scraping noise
from fan
Obstruction at the inta k e or exhaust of fan Remove obstruction
Fan bro k en Contact XPOWER for service/repair
Wea k air flow Obstructed vents and/or filters Clean out vents/inlets/filters
Change light
illuminated
Insufficient airflow caused by clogged filters
Replace the filters
Troubleshooting
- 15 -
- 13 -
HEPA35
– HIGH EFFICIENCY PARTICULATE AIR FILTER, also known as HEPA filter, ensures
superior air quality inside our homes and protects us from a wide range of health risks associated with
indoor air pollution. the filter is designed and implemented to trap even the tiniest contaminants
(approximately 99.97% of all particles measuring 0.3 microns) that aren’t usually captured by traditional
air filters, in order to prevent allergies and other common respiratory problems. The HEPA filter requires a
simple maintenance routine, which can be performed in a timely and cost-effective manner. To maximize
HEPA filter life, be sure to clean/change the pre-filters regularly. The Filter Change Light will light up when
filters need attention. Always make sure that the Air Scrubber is turned off before removing the HEPA
filter. Never use water to clean the HEPA filter. Use vacuum or clean cloth and lay it flat on a clean, dry
surface. When putting the HEPA filter back into the machine, make sure the side with the gasket is facing
the motor housing to prevent air leakage.
X-3500 Primary Filter Care (cont’d)