English - 8
User Maintenance and Servicing Instructions
Frequent maintenance is recommended on this appliance. Failure to follow the
maintenance instructions may cause failure of the appliance and void the warranty.
Always disconnect the machine from the power source before any maintenance or
servicing.
Fogging System Maintenance
Cleaning the Solution Tank
• Turn the fogging volume control to the lowest setting.
• Fill the solution tank with cold water to half of maximum capacity, close the solution
tank and shake the machine a few times. Then open the solution tank and discard the
water inside. Repeat the steps above 2 times.
• Check if the solution tank is clean. If not, please repeat the steps above until tank is
fully cleaned.
Cleaning the Liquid Conduit and Fogging Outlet
• Turn the fogging volume control to the lowest setting.
• Fill the solution tank with cold water to half of maximum capacity and close the
solution tank.
• Connect to power source.
• Turn on the machine and turn the fogging volume control to the highest setting.
• Keep the machine working for 3 minutes. Turn the fogging volume control to the lowest
setting, turn off the machine and disconnect the power source.
• Open the solution tank and discard the water inside. Close the solution tank. Wipe the
water on the machine surface and the fogging outlet.
• Use proper methods of cleaning for the solution tank. (
See Page 8: Fogging System
Maintenance
)
Start Your Job (Continued)
Cleaning the Surface
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Remove dirt or any other objects that could block the air inlet, air outlet or the fogging
outlet.
Storage
• When not in use, make sure no liquids are left in the solution tank.
• Store the appliance in a dry and cool indoor place. Make sure it’s out of reach of
children.
Selection Suggestions of Cleaning Agent
• It’s recommended to use
COLD WATER ONLY
to clean the fogging system.
