https://www.XPOtool.com
Item 63855
Page 4
The Tool Experts
09 2022-1
Use
1.
Completely lower both saddle pads.
2.
Align each saddle pad according to the lifting point of your vehicle, then centre the weight of the
vehicle above the car jack.
Warning!
Make sure that the traverse is at a right angle (90°) to the car jack.
3.
Raise the traverse, using the car jack, until one of the saddle points is about to contact its cor-
responding lifting point of the vehicle.
4.
Now raise the saddle pads until both pads contact the lifting points.
5.
When lowering the car jack and traverse, stay clear.
6.
Slowly lift the vehicle until is has reached the desired height.
Warning!
When lifting, make sure that the traverse stays level and the load centred over the jack.
7.
Place two jack stands at the recommended support points of your vehicle and adjust them so
that they almost contact the support points.
8.
When lowering the vehicle onto the stands, stay clear and lower the entire weight of the vehicle
onto the stands before beginning to work under it.
Exploded view and parts list
№
Name
Qty.
№
Name
Qty.
1
Holder
1
7
Washer
2
2
Extension tube
2
8
Washer
2
3
Saddle
2
9
Screw
2
4
Rubber pad
2
10
Connecting bolt
1
5
Screw
8
11
Spacer
1
6
Chain washer
2
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.