XPOtool 63855 Скачать руководство пользователя страница 3

 

https://www.XPOtool.com 

 

Item 63855

 

Page 3 

 

The Tool Experts

 

 

  

 

09 2022-1

 

 

Introduction

 

 

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we  ask you to 
always take some basic safety precautions when using this product. Please read this operating manual 
carefully and make sure that you understand it.

 

Keep these operation instructions in a safe place.

 

 
 

Safety instructions

 

 

 

Do not exceed the maximum charge capacity of 2000

 

kg (4000 lbs).

 

 

Make sure that the load is properly fixed to the device.

 

 

Wear appropriate protective equipment (e.g., protective gloves, safety goggles).

 

 

Do not use this traverse together with a car jack whose connecting bolt has not been safely 
fixed and entirely tightened.

 

 

Do not modify the product in any way.

 

 

Centre the load above the car jack saddle.

 

 

Adjust the pads so that the traverse stays level during lifting.

 

 

Only use with safety chains included. These must be properly fixed to avoid any overcharge.

 

 

Only fix and use perpendicularly to car jack housing.

 

 

Do not move a vehicle that sits on the traverse.

 

 

Only use the traverse according to its intended usage.

 

 

Do not use the traverse to lift a person.

 

 

Keep clear from charges lifted.

 

 

The traverse is not appropriate for aircraft use.

 

 

Check the traverse before each use. Do not use it when parts are loose or damaged.

 

 

The traverse is exclusively meant to serve as lifting device. Immediately after lifting, the vehicle 
must be supported and secured by appropriate means.

 

 
 

Assembly

 

 

Attention!

 

Before assembling, read all safety instructions!

 

 

1.

 

Remove the connecting screw of the saddle and the saddle itself from the car jack (not included).

 

2.

 

Place the traverse onto the car jack.

 

3.

 

With 3

 

t jacks with low profile and 3

 

t long-reach jacks, the spacer must not sit on the connecting 

screw. With other 3

 

t and 4

 

t car jack, slide the spacer onto the connecting screw.

 

4.

 

Fix the connecting screw of the traverse and securely tighten it. When doing so, the traverse 
must be perpendicular to the housing of the car jack.

 

 

 

 

 

Отзывы: