https://www.XPOtool.com
Item 63122
Page 4
The Tool Experts
05 2022-1
Technical specifications
Power voltage
(V)
230
Mains frequency
(
㎐
)
50
Nominal power
(W)
800
Hose length
(
㎝
)
100
Length of suction nozzle
(
㎝
)
23
Tank volume
(ℓ)
20
Protection class
II
IP protection class
IPX0
Parts list
№
Name
1
Tank
2
Lid
3
Latch
4
Handle
5
Switch
6
Power cord with plug
7
Inlet
8
Socket
9
Elastic hose
10
Suction nozzle
11
Air filter
12
Fabric air filter
13
Wheels
Operating the unit
Preparation
•
First check the container of the vacuum cleaner and clean it of waste material if necessary.
Then check the condition of the filters. The ash vacuum cleaner has two types of filters: a rigid
one equipped with a rubber seal and a fabric filter. When dirty, the filters must be cleaned using
compressed air at no more than 3
bar pressure. If the dirt cannot be removed from the filters,
they must be replaced with new ones. Check the condition of the seal integrated at the upper
edge of the rigid filter. If it is damaged, the filter must be replaced with a new one.
Note!
It is forbidden to operate the vacuum cleaner without a properly fitted air filter. Otherwise, it might
damage the vacuum cleaner and increase the risk of electric shock.
