HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS
Will cause property damage or severe injury.
Prevention
Do not use substances containing bleach or chlorine.
Do not use halogenated hydrocarbon solvents such as bleach, mildewcide, methylene chloride
and 1,1,1 - trichloroethane. They are not compatible with aluminum.
Contact your coating supplier about the compatibility of the substances used with aluminum.
HAZARD: GENERAL
Can cause severe injury or property damage.
Prevention
Read all instructions and safety precautions before operating the tool.
Follow all appropriate local, state, and national codes governing ventilation, fire prevention, and
operation.
Use only manufacturer authorized parts. The user assumes all risks and liabilities when using
parts that do not meet the minimum specifications and safety requirements of the pump manu-
facturer.
Before each use, check all hoses for cuts, leaks, abrasion or bulging of the cover. Check for
damage or movement of couplings. Replace the hose immediately if any of these conditions ex-
ist. Never repair a paint hose. Replace it with another grounded high-pressure hose.
All hoses, fittings, and filter caps must be secured before operating the spray pump. Unsecured
parts may eject at great force or leak a high pressure fluid stream causing severe injury.
All hoses, swivels, guns, and accessories must be pressure rated at or above 3000 PSI/
20.68 Mpa.
Do not spray outdoors on windy days.
Wear clothing to keep paint off skin and hair.
Do not operate or spray near children. Keep children away from the equipment at all times.
Do not overreach or stand on an unstable support. Keep effective footing and balance at all
times.
Stay alert and watch what you are doing.
Do not operate the unit when fatigued or under the influence of drugs or alcohol.
Important Electrical Information
Notice!
This machine is provided with a non-resettable thermal overload.
Always disconnect the motor from the power supply before working on the equipment.
The cause of the overload should be corrected before restarting. Take unit to Service Center.
Grounding Instructions
This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This product is equipped with a cord
having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
Improper installation of the grounding plug
can result in a risk of electric shock.
https://www.XPOtool.com
Artikel 63003
Seite 6
The Tool Experts
04 2021
-1
