3. Remove the inlet filter from the suc-
tion tube and place into a waste con-
tainer
(do not discard)
.
4. Verify that the seals are present inside
the adapter and suction tube. Thread the
pump cleaning adapter onto a garden
hose. Connect hose and adapter to the fit-
ting on the end of the suction tube.
6. Unclip the return tube from the suc-
tion tube and place it into the waste con-
tainer. Turn the
PRIME/SPRAY
knob to
PRIME
.
7. Turn water supply on. Turn the pump
ON (l)
. Water will flow into the suction tube
and out through the return tube. Let the
pump run for a few minutes to allow the re-
turn tube to be completey flushed.
Leave pump running during steps 7
and 8
8. Place the original material container next to
the waste container. Aim the spray gun into
the side of the
original material container
and hold the trigger.
9. While pulling the trigger, turn the
PRIME/SPRAY
knob to
SPRAY
to purge
material from the hose back into the ori-
ginal container.
Keep holding trigger through next steps.
https://www.XPOtool.com
Artikel 63003
Seite 16
The Tool Experts
04 2021
-1
