https://www.XPOtool.com
Item 62543–62545
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Product information
This pump convinces by newest technology, a stable product performance, a compact design, a light
weight, and a versatile application possibility. The pump can be easily connected to a car battery.
Safety instructions
This device is not intended for use by persons (including children) with limited physical, sensory, or
mental abilities or with lack of experience and/or knowledge, unless they are supervised or instructed
by a person responsible for their safety on how to use this device. Children should be supervised to
ensure that they do not play with the device.
•
Perform a visual inspection of the appliance before each use. Do not use the device if safety
devices are damaged or worn. Never override safety devices.
•
Use the device only for the purpose specified in this manual.
•
You are responsible for safety in the work area.
•
If the cable or plug is damaged due to external influences, the cable must not be repaired! The
cable must be replaced with a new one. This work may only be carried out by a qualified elec-
trician.
•
The voltage of 230
V AC specified on the type plate of the device must correspond to the existing
mains voltage.
•
Never lift or transport the device by means of the mains cable.
•
Make sure that the electrical plug connections are protected from moisture and flood.
•
Disconnect the device from the power supply before carrying out any maintenance or repair
work.
•
Do not expose the product to direct water jets or rain.
•
The operator is responsible for compliance with local safety and installation regulations. Ask a
qualified electrician if necessary.
•
If the device should fail, repair work may only be carried out by a qualified electrician.
•
The unit must never run dry or be operated with the suction pipe fully closed. Any damage to
the unit caused by dry running will invalidate the manufacturer’s warranty.
Warning!
Read all safety instructions and instructions. Failure to follow the safety precautions and in-
structions may result in electric shock, fire, and/or serious injury. Keep all safety information and instruc-
tions in a safe place for future reference.
Commissioning
The temperature of the liquid pumped should not 35
℃
in continuous operation. The pumping
of aggressive liquids (acids, lyes, silo leach etc.) as well as liquids with abrasive substances (e.g., sand)
must be avoided. Also do not pump any highly flammable liquids (e.g., petrol) with this pump. The oil
suction pump is suitable for a clean oil change or for pumping off engine, diesel, and heating oil.
Attention!
•
Danger of explosion!
Do not pump petrol, petroleum, or other easily inflammable liquids!
•
Ensure correct polarity when connecting the battery terminals!