© by WilTec Wildanger Technik GmbH
Item 61054
Page 6
04 2022
-1
•
Do not use a power tool whose power switch is defective. A power tool that can no longer be
turned on or off is dangerous and must be repaired.
•
Pull the plug out of the outlet and/or remove the battery before making adjustments to the ma-
chine settings, changing parts, or storing the machine. These extra measures will help prevent
any unexpected starting of the power tool.
•
Keep unneeded power tools out of the reach of children. Do not allow the power tool to be used
by a stranger or by persons who have not read this instruction manual. Power tools are danger-
ous when they are used by inexperienced persons.
•
Take care of your power tool. Check to make sure that moving parts are functioning properly
and not locking or jamming, if parts are broken or damaged in such a way that the mode of
operation of the power tool is affected. Have damaged parts repaired before using the machine.
Many accidents are caused by poorly maintained power tools.
•
Keep cutting edges sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less prone to jamming or locking and are easier to handle.
•
Use the power tool, its accessory parts, and replacement parts in accordance with these in-
structions. Consider the working conditions and the task at hand. Using a power tool for a pur-
pose other than its intended use can lead to dangerous situations.
Service
Only have the power tool repaired by qualified persons and only with the original replacement parts to
ensure that the safety of the machine is maintained.
Warnings!
•
While working with this tool, the dust generated can be dangerous to your health. While working
with a sander, always wear eye protection and a dust mask. Do not work with material containing
asbestos, which is known to cause cancer.
•
Special caution must be taken while sanding material containing lead:
◦
All persons working with the machine or entering the workspace must wear a special mask
for protection from lead colours and steam.
◦
Children and pregnant women are not allowed to enter the workspace.
◦
At the workspace, it is not allowed to eat, drink, or smoke.
◦
Contact with or inhaling of the sanded dust (e.g., lead-based coating material) can cause
damage to health of users. Always wear properly sized personal protection equipment such
as a dust mask and use a dust bag while sanding.
•
The power cable must be kept away from the moving parts of the machine.
Abrasive disc selection
The drywall sander is shipped with 6
pieces of sanding paper (80/100/120/150/180/240
grit). This abra-
sive is suitable for most applications. Abrasive discs of 120
grit and 240
grit are available for situations
requiring a smoother finish.