XPERT
Universal Remote
4 Dip Switch Settings
User’s Guide
The
dip switches are located in
the battery compartment (shown below).
Depending on the overlay selected, you
may need to change these settings
according to dip switch setting shown with
the overlay illustration.
1 .
Using a soft-tipped object, press the
RESET
button lo
[Channel
, and
but-
tons.
orientate the remote as shown
l
use a pen tip to move the switch
setting(s)
l
reset (clear) the remote as
described below.
OFF
ON
5 Resetting the
Remote Control
The XPERT Remote Control will
require resetting if the remote appears
inoperative, or may require resetting
when replacing the batteries. When
reset is initiated, the
briefly
illuminate sequentially
left to
.
NOTE: Pressing [Reset] clears your
remote’s memory. All user
defined [SPEED] programming is
cleared from memory. The
XPERT remote’s address is set to
“0” when resetting the remote.
14
123470638.AA
STEREO
TUNING
1234706380AA
